Skip to content

a blog on effects

Menu
  • Home
  • collection (486)
  • Ibanez (111)
  • Danelectro (53)
  • DOD, Digitech (51)
  • Electro-Harmonix (40)
  • Boss (54)
  • Other Brands (177)
Menu

Danelectro Wasabi AD-1 Forward/Reverse Delay

Posted on 22/09/201426/09/2014 by mirosol

AD1-FRDelay

What is it?
Danelectro Wasabi Forward/Reverse Delay. Made in china, 2003.

Another prime example of Danelectro’s ability to create unique box designs. There are five designs for this series.. Or we should possibly talk about Wasabi as a separate brand. But we won’t. Everything about the pedal simply screams Danelectro, even though the Wasabi was intented to be a new brand altogether. You may or can think or make what you want of it. I’m still calling these Danelectro Wasabis.

Of the series of five effects (Distortion, Overdrive, “Rock-a-Bye”, Chorus/Trem and this delay), i somehow felt the biggest draw to to this one. And i happened to score one for very reasonable price. Previous owner had made pretty profound attachment to the bottom plate. Apparently to have the ability of sticking the pedal to velcro’ed pedalboard without damaging the bottom rubbers. Noble effort, but it took me hours to get the sticky glue residue off from the rubber. Anyway. Forward/Reverse Delay? Maybe the status of Back Talk reverse delay was one of the inspirations sources for creating a design with both modes. But. Let’s go things through in traditional manner. Opening the bottom

AD1-FRDelay-guts1

Complex SMD board with components smaller than usual. Well, the enclosure could have housed bigger boards, but battery slot always takes its share of the room available. Lifting the jack board which also houses part of the design, we have several big chips close to each other. I think my desktop computer’s motherboard has lower component density than this one. Complexity grows with added features in linear manner.

AD1-FRDelay-guts2

We have standard digital delay with your everyday controls, delay mix (from all dry to all wet), delay time (called “speed”?! and this one goes from 0 ms to 3000 ms – that’s 3 seconds) and amount or repeats (from one to infinite oscillating space mass). In addition to these rather standard controls we have Hi Cut, which cuts higher frequencies from every repeat. Not completely unlike the feature we find in Danelectro’s Reel Echo desktop/pedal unit. One push of a colorful button turn the repeats in reverse. Oh. Let’s not forget the tap tempo feature. Or in this case, a tap speed. This is a great addition to controls mentioned above.  There’s one more thing. The input selector. We have different input level setting for humbuckers, single coils and general “off” setting. These settings set the input level to suit the guitar used. May be useful in those cases where one wants to use the delay with active pickups or after another device with too high output level.

It’s not a competition to any high end delay box, but when these were available ten years ago, the bang for buck factor was pretty respectable.

How does it sound?
Could be better. In fact, a lot better. The features are very attractive, but the issues come with the sounds. To my ears the reverse mode is about as good sounding as the one found in Digitech’s X-series Delay. And that’s the best part. The raw, fast digital attack of the basic delay is nearly painful to listen to. Maybe even worse than the awful attack we hear on Boss DD-3. For drone/ambient folks, this makes a fine toy. And possibly for home guitarists as well. It could also be used as a shock effect when recording. But as a delay to be used daily on a pedalboard? No. Look elsewhere.

6 thoughts on “Danelectro Wasabi AD-1 Forward/Reverse Delay”

  1. Marius says:
    13/02/2016 at 15:06

    Good morning i’m in trouble with wasabi chorus trem i miss some components on the power section… i can’t find a schematics or photos of this part can you help me?

    Reply
  2. Tom says:
    1/02/2017 at 19:40

    hello, can you please tell me what kind of chip is in the wasabi delay? thanks

    Reply
  3. Sam says:
    11/08/2017 at 03:24

    If you still have this pedal, would you consider selling It? It was the best delay I ever owned, and I regret selling mine very much. Thank you.

    Reply
    1. mirosol says:
      11/08/2017 at 08:03

      Yes i have it, and no, i won’t sell it. Like i won’t sell anything else from the collection. :)
      +m

      Reply
  4. Chas says:
    9/04/2018 at 11:48

    Hi
    I have tbe same pedal but d1 has blown, it is the diode at the back of the power input.
    I can not see what its value is.
    Do you know its value or anywhere that would know.

    Many thanks and best wishes
    Chas

    Reply
    1. mirosol says:
      9/04/2018 at 14:35

      As that is the parallel polarity protection diode, the type or value does not matter all that much. Any diode will do. Normal types for those are your 1N4001, 1N4002 and 1N4007. You could also just take it out and the pedal should work fine. However. With no polarity protection in place, the reverse voltage from wrong polarity power supply will kill the circuit instantly.

      Try any diode you have (in correct direction) in its place. Anything other than zener type will be fine.
      +m

      Reply

Leave a Reply to Chas Cancel reply

Your email address will not be published. Required fields are marked *

/usr/bin/locate

/usr/bin/whoami

here used to be a short description of me. however, it wasn't exactly accurate anymore. so i'm replacing it with this placeholder for now. and yes. it's been a long time since my last post. but let me assure you. i'm very much still alive.

Found an error? One of my assumptions is dead wrong? Something else is just not right? Let me know! Leave a comment to a post, or drop a line to mirosol at kapsi dot fi.

I do mods, repairs and custom builds too. For inquiries, use the email address above.

/var/lib/collection

  • Electro-Harmonix (40)
  • DOD, Digitech (51)
  • Other Brands (177)
  • Boss (54)
  • Danelectro (53)
  • Ibanez (111)

/var/lib/tags

Amp Autowah Bass Boost Booster Chorus Compressor Delay Distortion Echo Envelope Filter EQ Filter Flanger Fuzz Harmony Loop Modulation Noise Gate Octave Overdrive Phaser Pitch Power Preamp Reverb Special/Multi Synthesizer Tremolo Tuner Utility Vibe Vibrato Wah

/usr/lib/comments_recent

  • zix on DOD FX55-B Supra Distortion
  • Ali Imran on Ibanez MF5 Modern Fusion
  • Ali Imran on Ibanez MF5 Modern Fusion
  • Schlunzo on Ibanez MS10 Metal Charger
  • Jefferson on Ibanez MS10 Metal Charger

/var/lib/archives

  • August 2016
  • July 2016
  • June 2016
  • September 2015
  • June 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015
  • January 2015
  • December 2014
  • November 2014
  • October 2014
  • September 2014
  • August 2014
  • July 2014
  • June 2014
  • May 2014
  • April 2014
  • March 2014
  • February 2014
  • January 2014
  • December 2013
  • November 2013
  • October 2013
  • September 2013
  • August 2013
  • July 2013
© 2025 | Powered by Superbs Personal Blog theme